PUBLICATIONS

Meherwan P. Boyce P.E.

TECHNICAL

Boyce, M. P., Compressors are the Core of Gas Turbines, Power and Energy Technology – China, Summer 2008

Boyce, M. P., Advanced Gas Turbines, Availability and Maintainability, Power and Energy Technology – China, Spring 2008

Boyce, M. P., When Things Go Wrong: Identifying Combined Cycle Problem Areas. Modern Power Systems November 2007, pages 30-37l,

Boyce, M. P., Preventing Compressor Surges, Turbomachinery International,
Pg. 40-42, September/October 2007

Boyce, M. P., Combined-Cycle Power Plants use Gas and Steam to Generate
Electricity Efficiently, Spring 2007 Power and Energy Technology, pg 12-18

Boyce, M. P., The Testing of Gas Turbines, ASME Power 2007, San Antonio, Texas,
July 2007

Boyce, M. P., Advanced Axial Flow Turbines, March/April 2007 Turbomachinery International, Pg 40-41

Boyce, M. P., Combined Cycle Power Plants, Power and Energy International, Pg 34-35 Nov/Dec 2006

Boyce, M. P., Maintaining Combustors-New Designs Reduce Emission But Require Additional Care, Turbomachinery International, Pg 34-35 Nov/Dec 2006

Boyce, M. P., Recovering Performance Compressor Operation and Maintenance is Crucial to Regaining Losses in Gas Turbine Efficiency and Output, Turbomachinery International, Pg 6-7 July/August 2006

Boyce, M. P., Performance Characteristics Of Advanced Gas Turbine Cogeneration  Power Plants ASME – IMECE 2005-82325 Proceedings of International   Mechanical Engineering Congress and Exposition, Orlando Florida. November 2005

Boyce, M. P., Francisco Gonzales, A Study of On-Line and Off-Line Turbine   Washing to Optimize the Operation of a Gas Turbine, ASME – GT -2005-   69126, Reno, Nevada. June 2005. Also published in the Journal of Turbomachinery June 2006 GTP-05-1136

Boyce, M. P., They Don’t Make ’Em Like That Anymore “Reliability, Availability, Maintainability of Advanced Gas Turbines” Turbomachinery International, September/October 2004, Vol.45 No.5 Pg. 16

Boyce, M. P., Jeffery N. Phillips, Jay Grandmont, Leonard Angelo, Simplified On-Line Performance Monitoring of Simple Cycle Gas Turbines using Spreadsheet based Calculation, ASME – GT -2004-54123, Vienna, Austria. June 2004.

Boyce, M. P., Operation of Combined Cycle Power Plants ASME Vienna Austria. June 2004.

Boyce, M. P., Long Term Service Agreements for Large Combined Cycle Power Plants, ASME Vienna Austria. June 2004.

Boyce , M. P., Operation of  New Advanced Gas Turbines for Combined Cycle Power Plants ASME Power Conference Baltimore, MD. April 2004

Boyce , M. P., Long Term Service Agreements for New Advanced Gas Turbine Power Plants ASME Power Conference Baltimore, MD. April 2004

Boyce, M. P., Identification and Correction of Machinery Losses by Modeling Plant Thermodynamics of Combined Cycle Power Plants. IDGTE Gas Turbine Conference, Milton Keyes, U.K.  October 2003

Boyce, M. P., Increase in Availability and Reliability of Combined Cycle Power Plants, ASM International Conference on Combustion Turbines and Hot Section Components, Conference Proceedings, Pittsburgh PA. October 2003

Boyce, M. P., Latcovich, Jr., John A., Condition Monitoring and Its Effect on the Life of New Advanced Gas Turbines, ASME -IGTI, Global Gas Turbine News Volume 42: 2002, No. 3 Page 4, November 2002

Boyce, M. P., A Compendium of Condition Monitoring for New Advanced Gas Turbines, Imperial College, October 2002

Boyce, M. P., Latcovich, Jr., John A., Condition Monitoring and Its Effect on the Life of New Advanced Gas Turbines, Gas Turbine Users Conference, Houston TX. April 2002

Boyce, M. P., Advanced Condition Monitoring For Advanced Gas Turbines, EPRI Conference, International Conference on Advances In Life Assessment and Optimization of Fossil Power Plants Orlando FL., March 2002.

Boyce, M. P., Assessments of Trends in Condition Monitoring Systems and Life Cycle Cost Management for Combined Cycle Power Plants, DOE, Advanced Gas Turbine and Condition Monitoring Conference and Workshop, February 2002.

Boyce, M. P., Assessments of Trends in Condition Monitoring Systems and Life Cycle Cost Management for Combined Cycle Power Plants, DOE Morgantown December 2001

Boyce, M. P., Turbomachinery in the Next Millennium, Gas Turbine Symposium, Sponsored by the Institute of Diesel and Gas Turbine Engineers, Milton Keynes, England, UK, September 2001

Boyce, M. P., New Trends In Gas Turbines a Seminar Naval Post Graduate School, Monterey CA, July 2001

Boyce, M. P., Reliability, Availability, and Maintainability Program for Advanced Gas Turbines in Combined Cycle Applications, US. DOE. Next Generation Turbine Stakeholder Meeting, April 9-10, 2001

Boyce, M. P., “Turbo Machinery in the next Millennium” ASME – IGTI January 2001

Boyce, M. P., Advanced Cycles for Combined Cycle Power Plants, Russia Gas Turbo-Technology Publication, November-December 2000

Boyce, M. P., Turbo-Machinery for the Next Millennium, Russia Gas Turbo-Technology Publication, September-October 2000

Boyce, M. P., Gonzales F.J. " Solutions to Field Problems of a Gas Turbine-Axial Flow Chemical Process Compressor Train based on Computer Simulation of the Process" Proceedings of the 28th. TurboMachinery Symposium, Texas A & M University, September, 1999. pp 89-104.

Boyce, M. P. " Managing Power Plant Life Cycle Costs", Russia Gas Turbo-Technology Publication, January - February 2000

Boyce, M. P. “Performance Characteristics of a Steam Turbine in a Combined Cycle Power Plant" Proceedings of the 6th. EPRI Steam Turbine Generator Workshop August 1999.

Boyce, M. P. “Cutting Edge Turbine Technology” Middle East Electricity October/November 1999

Boyce, M. P. “Condition Monitoring of Combined Cycle Power Plants” Asian Electricity July/August 1999, pp35-36

Boyce, M. P. “Managing Power Plant Life Cycle Costs" International Power Generation, July 1999, pp21-23.

Boyce, M. P. "Performance Monitoring of Large Combined Cycle Power Plants" Proceedings of the ASME 1999 International Joint Power Generation Conference, July 1999, San Francisco CA. Volume 2  pp183-190.

Boyce, M. P. “How to Identify and Correct Efficiency Losses through Modeling Plant Thermodynamics" Proceedings of the CCGT Generation Power Conference, March, 1999, London U.K.

Boyce, M. P.  "Total Performance Condition Monitoring Of Major Petrochemical Facilities” Presented at the Materials, Selection and Application in the Chemical Process Industry Seminar, London, UK, Sponsored by The Institute of Materials, and co-sponsored by Institute of Chemical Engineers, and the Institute of Corrosion, November 1998.

Boyce, M.P.  “The Economics of Captive Power Plants.” – Presented at Power in the Gulf conference in December 1997.

Boyce, M.P. and Cox, William M.  “Condition Monitoring Management-Strategy.” – Presented at The Intelligent Software Systems in Inspection and Life Management of Power and Process Plants in Paris, France, August 1997.

Boyce, M.P. and Venema, J.  Condition Monitoring and Control Center – Presented at the Power Gen Europe in Madrid, Spain, June 1997.

Boyce, M.P.  “Improving Performance with Condition Monitoring” – Power Plant Technology Economics and Maintenance, March/April 1996, pp. 52-55.
Boyce, M.P.  “Control and Monitoring an Integrated Approach.” Presented at Middle East Electricity, December 1994, pp. 17-20.

Boyce, M.P., Meher-Homji, C.B, Lakshminarasimha, A.N., gas Turbine and Combined Cycle Technologies for Power and Efficiency enhancement in Power Plants ASME 94-GT-435

Boyce, M.P., Gabriles, G.A. and Meher-Homji, C.B.  “Enhancing System Availability and Performance in Combined Cycle Power Plants by the Use of Condition Monitoring.”            Presented at the European Conference and Exhibition Cogeneration of Heat and Power.  Athens, Greece.  3-5 Nov. 1993.

Boyce, M.P. and Herrera, G.  “Health Evaluation of Turbine Engines Undergoing Automated FAA Type Cyclic Testing.”  Presented at the SAE International Ameritech ’93.  Costa Mesa, CA, 27-30 Sept. 1993.  SAE Paper No. 932633.

Meher-Homji, C.B., Boyce, M.P. Lakshminarasimha, A.N., Whitten, J.A. and Meher-Homji, F.J. Condition Monitoring and Diagnostic Approaches for Advanced Gas Turbines.”  Proc. ASME Cogen Turbo Power 1993.  7th Congress and Exposition on Gas Turbines in Cogeneration and Utility.  Sponsored by ASME in participation of BEAMA. IGTI-Vol. 8 Bournemouth, United Kingdom. 21-23, Sept. 1993.  pp. 347-55.

Boyce, M.P., Gabriles, G.A., Meher-Homji, C.B., Lakshminarasimha, A.N. and Meher-Homji, F.J. “Case Studies in Turbomachinery Operation and Maintenance using Condition Monitoring.” Proc. of the 22nd Turbomachinery Symposium.  Dallas, TX. 14-16 Sept. 1993. 101-12.

Boyce, M.P.  “Principles of Operation and Performance Estimation of Centrifugal Compressors.”  Prod. of the 22nd Turbomachinery Symposium.  Dallas, TX.  14-16 Sept. 1993.  161-78.

Boyce, M.P., Meher-Homji, C.B., and Lakshminarasimha, A.N.  “Evolution of a Unified Turbomachinery Condition Monitoring System and its Application to Gas and Steam Turbine Utility Plants.”   Proc. of 3rd EPRI Steam Turbine/ Generator Workshop. Albany, NY.  20-23 July 1993.

Boyce, M.P. “Turbomachinery Condition Monitoring Systems for the Hydrocarbon Processing Industry.”  Hydrocarbon Technology International Magazine.  26-27 June 1993.

Boyce, M.P., Lakshminarasimha, A.N., and Meher-Homji, C.B.  “Design and Implementation of an advanced Multi-Machine Gas Turbine Train Condition Monitoring and Control system.”  Presented at the Third Congress of Turbomachinery.  Queretaro, Mexico.  Dec. 1992.

Lakshminarasimha, A.N., Boyce, M.P. and Meher-Homji, C.B.  “Modeling and Analysis of Gas Turbine Performance Deterioration.”  Presented at the 37th ASME International Gas Turbine and Aeroengine Congress and Exposition.  Cologne, Germany. 1-4 June1992.  ASME Paper No. 93-GT-395.

Boyce, M.P.  “Performance Monitoring of Cogeneration Facilities.”  Presented at the 1st International POWER Technology Exposition and Conference.  McCormick Place, Chicago.  Oct. 31-Nov. 2, 1989.

Boyce, M.P. and Echegaray, L.E.  ‘’Aerothermal Analysis Improves Efficiency and Availability of TurboMachinery.” Plant Services Handbook of Computerized Maintenance Management and Predictive Maintenance. Oct. 1989, pp.102-104.

Barnes, G., Boyce, M.P., Wooldridge, B. and Meher-Homji, C.B.  “On-Line Condition Monitoring of Two Westinghouse CE 352 Gs Turbine Compressor Sets.”  Proc. of the 8th NRCC           Symposium on Industrial Application of Gas Turbines.  Ottawa, Canada, 24-27 Sept. 1989.  85-98.

Boyce, M.P., Bhargava, R.K. and Chinoy, R.  “On-Line Condition Monitoring of TurboMachinery.” Proc. of the 1st International Machinery Monitoring and Diagnostic Conference. Las Vegas, NV.  11-14 Sept. 1989.  419-27.

Boyce, M.P., Meher-Homji, C.B. and Wooldridge, B.  “Condition Monitoring of Aeroderivative      Gas Turbines.” Presented at the Gs Turbine and Aeroengine Congress and Exposition.  Toronto, Canada.  4-8 June 1989.  ASME Paper No. 89-GT-36.

Boyce, M.P., Meher-Homji, C.B. and Mani, G.  “A Diagnostic Methodology for Condition Monitoring of High Speed TurboMachinery.” Presented at the Society of Tribologists and Lubrication Engineers Conference.  Atlanta, GA.  1-4 May 1989.  Publication No. STLE SP-27.

Boyce, M.P.  “Rerating of Centrifugal Compressors-Part II.”  Diesel and Gas Turbine Worldwide.  Jan.-Feb. 1989.  8-20.

Unsal, R. and Boyce, M.P.  “Experience with On-Line Condition Monitoring System.”  Proc. of the 17th TurboMachinery Symposium.  Dallas, TX.  8-10 Nov. 1988.  pp.57-66.

Boyce, M.P.  “Rerating of Centrifugal Compressors-Part I.” Diesel and Gas Turbine Worldwide.  Oct. 1988.  46-50.

Boyce, M.P.  “Advanced Condition Monitoring Protection and Control of  TurboMachinery.”         Presented at the BHRA Conference.  Milton Keynes, U.K.  27-28 Oct. 1988.  Paper C-4.

Boyce, M.P.  “Advanced Maintenance Management System Design for the LM2500 Gas Turbine.”  Presented at the SAE Conference and Exposition on Future Transportation Technology. San Francisco, CA.  Aug. 1988.  SAE Paper No. 881171.

Boyce, M.P.  “Advanced Monitoring Protection and Control of TurboMachinery.”  Diesel and Gas Turbine Worldwide.  May 1988.

Boyce, M.P.  “Rerating of Centrifugal Compressors.”  Proc. of the 16th Texas A&M             TurboMachinery Symposium.  Dallas, TX.  27-29 Oct. 1987.

Boyce, M.P., “Higher Availability and Efficiency Using On-Line Real Time Diagnostic and Prognostic System on Gas Turbine Compressor Trains.” Presented at the ASME Beijing International Gas Turbine Symposium and Exposition.  1-7 Sept. 1985.

Boyce, M.P., Bowman, J.C., Meher-Homji, C.B. and Focke, A.B.  “Energy Efficient Operation of Gas Turbine Compressor Sets.”  Presented at the ASME Gas Turbine Conference and     Exhibit.  Houston, TX.  18-21 Mar. 1985.  Publication No. 85-GT-78.

Boyce, M.P., Meher-Homji, C.B. and Focke, A.B.  “An Overview of Cogeneration Technology-Design Operations and Maintenance.” Proc. of the 13th TurboMachinery Symposium.  Houston, TX.  13-15 Nov. 1984.  3-24.

Boyce, M.P., Meher-Homji, C.B., Focke, A.B. and Bowman, J.D.  “Detection of Turbomachine      Blading Problems Using On and Off-Line Analysis.” Proc. of the EPRI Conference.  Incipient Failure Detection in Power Plants.  Buena Vista, FL.  10-12 Oct. 1984.

Boyce, M.P., Bohannan, W.R., Brown, R.N., Gaston, J.R., Meher-Homji, C.B., Meier, R.H. and Pobanz, N.E.  “Practical Aspects of Centrifugal Compressor Surge and Surge Control Systems.” Proc. of the 12th TurboMachinery Symposium.  Houston, TX.  15-17 Nov. 1983. 147-73.

Boyce, M.P., Meher-Homji, C.B. and Mani, G.  “The Development and Implementation of Advanced On-Line Monitoring and Diagnostic Systems for Gas Turbines.” Presented at the 1983 GTSJ Tokyo International Gas Turbine Congress.  Tokyo, Japan.  23-29 Oct. 1983.  Paper No. 83-Tokyo-IGT-94.

Boyce, M.P., Mani, G. and Meher-Homji, C.B.  “Reliability Improvement of Aerothermal Analysis of High Speed Rotating Machinery.” Presented at the Design and Production Engineering Technical Conferences, ASME.  Dearborn, MI.  11-14 Sept. 1983.  89-96.

Boyce, M.P., Meher-Homji, C.B., Mani, G., Lam, T. and Ansell, R.  “Operating Experience with Health Monitoring and Diagnostics of M.D. Steam Turbines and Centrifugal Compressors.” Presented at the ASME Joint Power Gen. Conference (JPGC).  Sept 1983.  Publication No. 83-JPGC-PWR 28.  1-8.

Boyce, M.P.  Äerothermodynamic Gas Path Analysis for Health Diagnostics of Combustion Gas Turbines and Centrifugal Compressors.” Presented at the ASME Joint Power Gen. Conference (JPGC).  Sept 1983.  Publication No. 83-JPGC-PWR 28.  1-8.

Boyce, M.P.  “Aerothermodynamic Gas Path Analysis for Health Diagnostics of Combustion Gas Turbines.” Presented at the 36th Meeting on Detection, Diagnosis and Prognosis, Mechanical Failures Prevention Group.  Scottsdale, AZ.  Dec 1982.

Boyce, M.P. and Meher-Homji, C.B.  “Aerothermal-Mechanical Health Monitoring and Diagnostics of Turbo-Compressor Sets.” Proc. of the 11th TurboMachinery Symposium.  Houston, TX.  14-16 Dec. 1982.  75-94.

Boyce, M.P.  “On-Line Monitoring and Diagnostics of Power Plants.” Proc. of the EPRI     Workshop on Incipient Failure Detection, 1982.

Boyce, M.P.  “The Design and Development of an External Fired Steam Injected Gs Turbine.” Proc. of the Industrial Energy Conservation Technology Conference.  March 1981.

Boyce, M.P.  “Mechanical and Aerothermal Diagnostics of TurboMachinery.” Proc. of the 32nd Mechanical Failures Prevention Group.  October 1980.

Boyce, M.P., Vyas, Y.K. and Trevillion, W.L.  “The External Combustion Steam Injection Gas Turbine for Cogeneration.” Proc. of the 13th Intersociety Energy Conversion Engineering Conference.  Vol. 1 SAE P-75.  San Diego, CA.  20-25 Aug. 1978.  Paper No. SAE     789534.  860-865.

Boyce, M.P.  “How to Achieve On-Line Availability of Centrifugal Compressors.”               Chemical Engineering.  June 1978.

Boyce, M.P., Trevillion, W.L. and Hoehing, W.W.  “Vaporized Fuel Oil…A New Gas Turbine Fuel.” Diesel and Gas Turbine Progress.  Mar 1978.

Boyce, M.P., Trevillion, W.L. and Wohlschlegel, D.  ‘’A Viscous Flow Model for TurboMachinery.” Proc. of the 1st International Conference on Centrifugal Compressor Technology. The Department of Science and Technology, Government of India, New Delhi.  20-23 Feb. 1978.  A6-25.

Boyce, M.P.  “Dynamic Simulation of High Speed Rotating Machinery.”  Presented at the ASME   Energy Technology Conference, September, 1977.

Boyce, M.P. and Nishida, A.  “Investigation of Flow in Centrifugal Impeller with   
Tandem Inducer.” Prod. Of the Tokyo Joint Gas Turbine Congress (sponsored by ASME, JSME and GTSJ).  Tokyo, Japan.  22-27 May 1977.  353-62.

Boyce, M.P.  “Secondary Flows in Axial Flow Compressors with Treated Blades.” Proc. of the 49th Meeting of the AGARD Propulsion and Energetics Panel.  Koninkllijk Instutuut van Ingenierus.  The Hague, The Netherlands.  28-30 March 1977. 5-1-13.

Boyce, M.P.  “The Role of a Spectrum Analyzer in the Performance and Maintenance Monitoring   of High Speed TurboMachinery.”  Presented at the Vibration Institute Seminar on    Machinery Preventive Maintenance and Fault Diagnosis.  Houston, TX.  Jan.-Feb. 1977.

Boyce, M.P.  “Spectrum Analysis-A Diagnostic Tool for High Speed Rotating Machinery.” Presented at the 92nd Meeting of the Acoustical Society of America.  San Diego, CA, 14-19 Nov. 1976.

Boyce, M.P., Trevillion, W.L. and Brown, M.L.  “Advanced Research Programs in TurboMachinery.” Proc. of the 5th TurboMachinery Symposium.  College Station, TX.  12-14 Oct. 1976.  31-44.

Boyce, M.P., Bayley, R.D., Vankayalapati, S. and Vijayvardhan, E.  “Field Testing of Compressors.” Proc. of the 5th TurboMachinery Symposium.  College Station, TX.  12-14     Oct. 1976.  149-59.

Boyce, M.P.  “Monitoring of TurboMachinery.” Technical Bulletin. Texas   Engineering Experimental Station, Texas A&M University.  College Station,   TX. Oct.1976

Boyce, M.P. and Brown, M.L.  “Liquid Fuel Applications in Gas Turbines.” Presented at the 1st. Simposium Venezolano de Turbines de Gas.  Caracas, Venezuela.  26-29 April 1976.

Boyce, M.P. and Vijayvardhan, E.  “Trends in TurboMachinery Research.” Presented at the Short Term Course on Gas Turbine Engineering.  Indian Institute of Technology.  Madras, India.  Dec. 1975.

Boyce, M.P.  “Spectrum Analysis for TurboMachinery.”  Presented at the 2nd Annual Rerating Machinery Engineers’ Senior Orbits Symposium.  South Lake Tahoe, NV.  June 1975.

Boyce, M.P. and Hanawa, D.A.  “Parametric Study of a Gas Turbine.” Presented at the Gas Turbine Conference.  Houston, TX.  2-6 March 1975.  1-9. ASME Paper No. 75-GT-46.

Boyce, M.P. and Hanawa, D.A.  “Development of Techniques for Monitoring TurboMachinery.” Presented at the Gas Turbine Operations and Maintenance Symposium.  Edmonton, Alberta, Canada.  Oct. 1974.

Boyce, M.P. and Chen, Mow-Shung.  “”Optimization of Various Gas Turbine Cycles.” Proc. of the 3rd TurboMachinery Symposium.  College Station, TX.  15-17 Oct. 1974.  91-100.

Boyce, M.P.  “Aerodynamic Characteristics of the Flow in the Clearance between the Impeller and the Casing.” Presented at the IV USSR’s National Scientific Conference on Compressors.  Cyma, Russia.  Sept. 1974.

Boyce, M.P.  “Engineering Education in Turbomachinery.” Presented at the ASME Gas Turbine Conference and Products Show.  Zurich, Switzerland.  March 30-April 4, 1974.  ASME Paper No. 74-GT-86.

Boyce, M.P., Schiller, R.N. and Desai, A.R.  “Study of Casing Treatment Effects in Axial Flow Compressors.”  Presented at the ASME Gas Turbine Conference and Products Show.  Zurich, Switzerland.  March 30-Aril 4, 1974.  ASME Paper No. 74-GT-89.

Boyce, M.P.  “Total Energy for Texas A&M.” Gas Turbine International.  Sept.-Oct. 1973.

Boyce, M.P. and Desai, A.R.  “Clearance Loss in a Centrifugal Impeller.”  Presented at the Intersociety Energy Conversion Conference.  Pittsburgh, PA.  August 1973

Boyce, M.P.  “Exhaust Gas Pollution Control at the Laredo, Texas Border Inspection Station.” Presented at the ASME Symposium of Flow Studies in Air and Water Pollution.  Atlanta, GA.  June 1973.

Boyce, M.P. and Desai, A.R.  “A Theoretical Analysis of Non-Isentropic Flow of a Compressible Viscous Gas in a Narrow Passage.” Presented at the International Lubrication Conference. New York, NY.  Oct. 1972.

Boyce, M.P.  “New Development in compressor Aerodynamics.” Prod. Of the 1st TurboMachinery Symposium.  College Station, TX.  24-26 Oct. 1972.  79-89.

Boyce, M.P. and Bale, Y.S.  “Diffusion Loss in a Mixed Flow Impeller.” Presented at the 7th Intersociety Energy Conversion Engineering Conference.  San Diego, CA.  Sept. 1972.

Boyce, M.P.  “Air Pollution Control of the Laredo Customs Station.” Government  Services Administration.  Texas A&M University.  College Station, TX.  Sept. 1972

Boyce, M.P. and Bale, Y.S.  “Feasibility Study of a Radial Inflow Compressor.”  Presented at the ASME International Gas Turbine and Fluids Engineering Conference.  San Francisco, CA.  26-30 March 1972.  ASME Paper No. 72-GT-52.

Boyce, M.P. and Neely, P.F.  “Decay of Swirl in Turbulent Two Phase Flow.” Presented at the 8th   Southeastern Seminar on Thermal Sciences.  Nashville, TN.

Boyce, M.P. and Bale, Y.S.  “A New Method for the Calculation of Blade Loadings in a Radial       Flow Compressor.” Presented at the ASME Gas Turbine Conference and Products Show.  Houston, TX.  March 28-April 1, 1971.  ASME Paper No. 71-GT-60.

Boyce, M.P.  “The Utilization of Internal Combustion Exhaust Gases for Air Conditioning.” Proc. of the 1971 Intersociety Energy Conversion and Engineering Conference.  Boston, Mass.  3-5 Aug. 1971.  Paper No. 719162.  1240-48.

Boyce, M.P. and Blick, E.F.  “Skin Friction Drag and Velocity Profile Measurement Techniques in Two-Phase Flow.” Presented at the ASME Fluids Engineering Conference.  Pittsburgh, PA.  9-12 May 1971.  ASME Paper No. 71-FE-32.

Boyce, M.P. and Bale, Y.S.  “A New Method for the Calculation of Blade Loadings
In Radial Flow Compressors.” Presented at the 16th International Gas Turbine Conference.  Houston, TX.  March 1971.  ASME Paper No. 71-GT-60.

Boyce, M.P. “Design of Compressor Blades Suitable for Transonic Axial Flow Compressors.” Presented at the International Gas Turbine Conference. Houston, TX.

Boyce, M.P.  Ä Practical Three-Dimensional Flow Visualization Approach to the Complex Flow  Characteristics in a Centrifugal Impeller.” Presented at the ASME International Gas Turbine Conference.  Zurich, Switzerland.  ASME Paper No. 66-GT-83.

Boyce, M.P. and Blick, E.F.  “Fluid Flow Phenomena in Dusty Air.” Presented at the ASME Winter Annual Meeting.  Los Angeles, CA.  16-20 Nov. 1969.  ASME Paper No. 69-WA/FE-24.

Boyce, M.P.  “Design of Compressor Blades Suitable for Transonic Axial-Flow Compressors.”    Presented at the ASME Gas Turbine and Conference Show.  Houston, TX.  5-9 March  1967.  ASME Paper No. 67-GT-47.

Boyce, M.P.  “Visualization of Three-Dimensional Flow in a Centrifugal Impeller.” Thesis., State University of New York.  Buffalo, NY.  1964.